** D62 Bios history **

Name convention is 
 seco_elkhartlake_D62_bios_<AMI_BIOS_TAG>_<BIOS_VERSION>_<RELEASE_DATE>_<RESTRICTION>.bin

Where:

  AMI_BIOS_TAG       Is AMI BIOS Tag used for the project
  BIOS_VERSION       Is SECO BIOS version with this format Major.Minor.Patch
  RELEASE_DATE       Is BIOS Release Date (yyyymmdd)
  RESTRICTION        Is related to bios configuration, PCIe aggregation, etc

    F0 = BIOS configured for LPC support (CFG=F0)
    F1 = BIOS configured for GPIO support (CFG=F1)
    F4 = BIOS configured for SERDES support (CFG=F4)

    4x1 = Four 1-lane PCIe interfaces (default BIOS)
    2x2 = Two 2-lane PCIe interfaces
    2x1 = Two 1-lane PCIe interfaces
    1x2 = One 2-lane PCIe interface
    1x4 = One 4-lane PCIe Interface
    	
    Note: to move from one aggregation to another one, the proper BIOS must be flashed

1.02.00 [2022-11-28]
  - First official BIOS
  - Add F4 configuration support

1.02.00 RC03 [2022-11-04]
  - Fix Linux kernel messages on RHPX device
  - Fix Linux kernel messages on SMBUS device busy
  - Security updates

1.01.02 RC02 [2022-10-21]
  - Fix S3 not working on Windows
  - Add support for Smart Battery
  - Fix for eMMC not properly working: add strobe support for HS400
  - Add RhProxy support
  - Fix power button not working on OS
  - Add last state management
  - Fix Ubuntu slow startup
  - Add Fixed boot order support
  - Add PXE boot support


1.01.00 RC04 [2022-03-14]
  - New tag to fix some security issues
  - Working Super IO on CS1
  - Remove unsupported MEC addresses 
  - Enhance thermal management

1.00.00 RC16 [2021-12-10]
  - Solved issue "MEC COM port not working and seen doubled from OS"
  - SPI interface at 3.3 volt


1.00.00 RC15 [2021-10-17]
  - eMMC Driver strength default change to avoid issues with Windows10
  - Removed support for CRB Audio codec


1.00.00 RC14 [2021-10-11]
  - Corrected bug "Power off not working"
  - Suppress FIVR setup menu
  - Corrected bug "SD card not working"
  - Added support for USB OTG management
  - Fix to remove unexpected debug messages on EC UART with BIOS in release mode
  - Enabled decode for 0x3F8 0x3E8 COM port
  - New method SecoTjMaxLib for reading critical temperature for chipset from MSR registers
  - Mec170x Fw010


1.00.00 RC12 [2021-09-07]
  - First R.C. for AMI Tag 12