Release kirkstone/27.0

released at 2025-01-30 13:59

Release: kirkstone/27.0 (including several small changes, support for some more MPEG4-H.264 video variants, and fixed temperature sensor read-outs for SANTARO/SANTOKA)

Project linux-guf

• LM73: fix temperature sensor on SANTARO/SANTOKA !349
• V4L2: Upgrade CODA960 to 5.15.171 to fix H264 constrained baseline !348
• dts:imx* Set default CMA !346

Project linux-imx-kuk

• arm64:dts: Add 7-inch Fannal display for MV with D18 !580
• dts:arm64: Add GPIO names for MV expander and clean up existing names !576

Project gf-emc-test-suite

• udp_echo: Change output path for binaries to ../bin !295
• Add script to enable/disable the default output on the terminal !294
• Add GPIOs to emission/immunity tests for MV !293

Project meta-seconorth-machine

• Move EEPROM Manager to meta-seconorth-distro !636
• Add SECO EEPROM Manager !635
• machine:mx8mp: Remove old/unsupported MV combinations !634
• systemd: enable kernel-msgs in journald !631
• CMA: Change default CMA size in defconfig and remove allocation in bootscript !630
• conf:seconorth-machine Configure serial console on USB-OTG port !627

Project meta-seconorth-distro

• Resolve YT-294 "Ntp date servers " !858
• ts_calibrate_extended: Move pointercal path to variable to simplify sync with Clea OS !857
• Add SECO EEPROM Manager to Flash-N-Go System !856
• touchcalibration: Fix touchscreen0 link for maxtouch, improve ts_calibrate_extended script. !853

Project meta-seconorth-nogplv3

• recipes:busybox: Enable nice for builds without GPLv3 packages !256

Release kirkstone/26.0

released at 2024-10-28 09:18

Release: kirkstone/26.0

Project manifest

• touchcal-conv: Remove from SRCREV to switch repo and disable auto integration !1963
• YT-247: Force build stage for noGPLv3 in scheduled builds !1951

Project gf-emc-test-suite

• scripts: Add gpu_load.sh script !284
• Add environment test scripts for PBB !281

Project meta-seconorth-mtk

• Revert "kernel:modules: Replace CRLF by LF line endings" !105

Project meta-seconorth-machine

• uuu-native: update 1.4.139 -> 1.5.182 !624

Project meta-seconorth-distro

• SCH-37 qtwaylandcompositor: implement work-around for QTBUG-128350 !845
• YT 187 fngsystem pack release artifacts more userfriendly !842
• touchcal-conv: Switch URL to clea-os !839
• touchcal-conv: Set to fixed revision: prepare to remove this from CI integration !838
• fngsystem-image: add ntpdate !831

Project config

• setup-environment: set default timestamp to latest manifest tag !294

Release kirkstone/25.0

released at 2024-09-10 12:11

Project manifest

• feature: Add tested feature SANTOKA WLAN !1938
• Update RTL8723BU feature !1928
• PBB-32 Fix suffix addition in FNG pipeline !1901

Project uboot-imx-kuk

• Add support for Santino and Santino-LT boards to U-Boot !233
• Enable Nallino support for U-Boot in machine layer !227

Project linux-guf

• panel-dt: switch sel6-8-gpio to low in unprepare !326

Project linux-imx-kuk

• arm64:dts: Reduce drive-strength for USDHC2 !568
• arm64:dts: Add touch to MV + G156HAN02 !566
• [MYON2][CONXM] add support for ATM 7" LVDS !561
• panel-dt: switch sel6-8-gpio to low in unprepare !552

Project yocto-install

• fng-install-mx6-boot.sh: check for boards with custom u-boot !82

Project gf-emc-test-suite

• mv:mx8mp: fix emission and immunity tests for modular vision !278
• rs485echo: Support all baudrates using termios2 ioctl directly from kernel header !275
• tests:network: Add UDP echo server and client !270

Project meta-seconorth-mtk

• kernel:modules: Replace CRLF by LF line endings !102

Project meta-seconorth-machine

• bootscripts: Remove '.scr' files from mx6 packages (again) !611
• bootscripts: Remove '.scr' files from mx6 packages !610
• linux-firmware: include rtl8822b bluetooth firmware binaries !607
• Enable support for Santino and Santino-LT boards in U-Boot recipes and configs !600
• linux:defconfig enable btusb module for mx6ull !599
• Add support of Nallino board to U-Boot !592

Project meta-seconorth-distro

• rtl8723bu: Remove firmware binaries again and rdepend on linux-firmware: fixes SDK build !828
• recipe:rtl88x2bu: Driver for internal WLAN Module SANTOKA !827
• certification-tool: Pull upstream change, fixes typo in path !824
• certification-tools: Move git url to point to public repo !823
• recipe:connectivity Driver for RTL8723BU !818

Project config

• YT-202 Make mirror generation more robust (add using archive mirror) !276

Release kirkstone/24.1

released at 2024-07-24 11:53

Pre-release for custom project

Project uboot-imx-kuk

• cmd:seco-ne: Add oneshot modes to ENV bootselect !228

Project yocto-install

• install-scripts: Add support of GPT partition type !65

Project meta-seconorth-mtk

• Revert "u-boot:script: Change default boot order and use alt ramfs name" !94

Project meta-seconorth-distro

• recipes:bootselect: Add oneshot modes to ENV bootselect !806

Release kirkstone/24.0

released at 2024-07-12 11:41

Project ilitek

• driver:irq: Remove disable_irq/irq_enable from threaded_irq routine !43

Project linux-guf

• logo: remove fng system logo !320
• tty:serial:imx: fix uart latency for rs485 on mx6ull !319

Project linux-imx-kuk

• arm64:dts:mc3: Enable hysteresis and reduce drive-strength for AC97 !540
• logo: remove fng system logo !533

Project yocto-install

• prepare-ethphy.sh: fix phy detection when interface is down !69

Project seco-sharedconf

• functions: get_from_fuse: Fix problem with busybox xxd !55
• script:common: Remove comment about printf -v option !54
• conf:functions: Replace printf -v !53

Project seco-show-demo

• qml:page: Add Debug page to app !55

Project gf-emc-test-suite

• setup-network: Add guard to not modify the interface just used for ssh access !253
• rs485echo: fix segmentation fault in echo mode !249
• remote station setup: Rework the scripts, add parameters to modify the installation !244
• remote-station: Add Makefile to create self installation script !243

Project meta-seconorth-mtk

• conf:common: Make console not stricktly set to UART1 !90

Project meta-seconorth-machine

• gfxml2dto:fngsystem: switch from fix commit to master !580
• bootscript: merge bootscript and bootscript-alt recipes !579
• Remove FNGS logo from defconfigs and update scripts to load external logo for FNGS boot !578

Project meta-seconorth-distro

• qtmultimedia: fix kernel warning on imx8m !792
• distro:fng: Re-add initramfs to release artefacts !791
• Add FNG System logo to fngsystem-image !788
• seco:demo: Add Debug page to config !780

Release kirkstone/23.0

released at 2024-06-13 13:26

Project u-boot-mtk

• tee:optee: Add support for applying MAC address from fuses !38

Project linux-imx-kuk

• Adaptions for new Modular Vision Rev. A !534

Project yocto-install

• fng-install: make it possible to define a background color during boot via a new command-line argument !59

Project gf-emc-test-suite

• pbb: Update test scripts !242
• pbb: bluetooth: Add bluetooth-only test, rework bluetooth commands !241
• iptest: Add message when tcp connection could not be established. !240
• bluetooth: Allow to specify package cnt and delay for bt_test !239

Project meta-seconorth-machine

• module:wifi: kernel-module-nxp-wifi update to lf-6.1.55 and make it default !577
• machine:seco-mx8mp:tr8+: Add specific initialization commands to bluetooth-init !575

Project meta-seconorth-distro

• TR8MP: rf-testing: Change branch to TR8MP script. !790
• Add audio group to weston and qt user !789
• tests: Add test scripts for azurewave module for rf-testing !787

Project config

• scripts:setup: Fix SOURCE_MIRROR_URL !262

Release kirkstone/22.1

released at 2024-05-29 07:27

Pre-release for customer project

Project linux-imx-kuk

• Fix issues with the DE DTs due to the MR with WUP !528
• arm64:dtb:tr8mp: Add overlay for no-mcu variant !524

Project gf-emc-test-suite

• rs485echo: Add TX_ONLY mode and allow to repeat forever !238

Project meta-seconorth-machine

• mx8mp: Add features.scr and overlay for TVIII+ without MCU !574
• kernel: Add new class to test if overlays apply directly after build !573

Release kirkstone/22.0

released at 2024-05-24 04:10

Project manifest

• Update hints.md !1573

Project uboot-imx-kuk

• board:seco:trizeps8plus: Fix version detection for variant V1R5 !218
• dts: reserved_memory: Increate MAX_LMB_REGIONS to allow more sections !216

Project u-boot-mtk

• Revert "cmd:seco-ne: Use rauc bootmode names" !34

Project linux-guf

• imx6qdl-santaro.dtsi: fix typo in ddc-i2c-bus property name !297

Project yocto-install

• Makefile.in: Fix paths to make buildable with devtool !64
• bootlogo improvements: handling of background color !51
• prepare-logo.sh: set different logo addr for nallino !50

Project seco-sharedconf

• seco-functions: Add module detection for Genio devices !48

Project seco-show-demo

• qml:video: sync play pause button state with media player stop play calls !53
• qml:video: update mediaplaylist references !52

Project gf-emc-test-suite

• Add an alternative version of bluetooth test that uses a new l2ping tool !218

Project meta-seconorth-mtk

• uboot:scripts: Change slot names to match bootselect names !84
• fngsystem: Load fdt file and overlays directly from fitImage !83
• Add shared config !78
• Adapt for new Flash-N-Go WiC image !63

Project meta-seconorth-machine

• bootscript: Add additional script as place to autodetect HW features !566
• bootscript-uboot: fix test -z cases !558
• Add service for bluetooth initialization during test !553

Project meta-seconorth-distro

• multiconfig: move configs for FNG System and Yocto to the correct location !779
• classes:image: Fix deployment of fngsystem archive !778
• conf:distro:include: Restrict tar image command override for NXP devices only !777
• Add custom fngsystem image type !769
• weston-init: fix display flickering !762
• bluez5: add an alternative l2pingd tool !760
• multiconfig: add configs for FNG System and Yocto with Wayland !748

Project config

• Optionally replace global downloads with mirror !255
• setup:script: Add optional download mirror for Yocto !254
• setup-environment: automate adding of available multiconfigs to local.conf !235

Release kirkstone/21.1

released at 2024-04-25 07:17

Fix release, as kirkstone 21.0 didn't applied the xml config during installation.

Project linux-imx-kuk

• arm64:dts:tr8p: Clean-up SAI2, audio codec and simple-audio-card definition !499

Project yocto-install

• prepare-xml2dto: fix platform detection !52

Project gfxml2dto

• dto:logo: set different logo addr for nallino !142

Project meta-seconorth-mtk

• kernel:dtbo:b79: Enable USB3 !73

Release kirkstone/21.0

released at 2024-04-19 16:38

Project manifest

• hints.md: adjust default URL and provide start command for qt-kiosk-browser !1752

Project uboot-imx-kuk

• Rename guf command and rework bootorder evaluation !203

Project u-boot-mtk

• cmd: Implement bootselect !24

Project linux-mtk

• dts:seco:common: Rework STM32 gpio config !56
• dts:seco: Remove seco-genio-irq.h file !55
• dts:genio-common: Fix reset pin for RTL8211 Ethernet phy !54
• dts:seco-genio-common.dtsi: ports for lvds-panel and bridge renamed !51
• drivers:gpu:drm:mediatek:mtk_dsi.c: dsi-driver repaired to support bridges !50
• dts:genio: Add pinfunc file, move irqs there !49

Project linux-imx-kuk

• Additional changes from the merge of the HAM / WUP states of the Trizeps VIII Plus !494
• Fix and merge additional changes from WUP !487
• arm64:dts: Add MV + FLD-070FML to Makefile !486
• arm64:dts: Add FLD-070FML + SOM-SMARC-MX8M-Plus !485
• arm64:dts:tr8p: Add initial trizeps8plus V1R3 devicetree with pconxs !484

Project yocto-install

• Install scripts: fix a path postinstall-status file and fix error handling !49
• Install scripts: Improve error handling, cleanup format !48

Project meta-seconorth-mtk

• kernel:linux:common: Disable atmel_mxt driver !71
• config:machine: Add supported hardware defines !70
• recipes-bsp:images:seconorth-image-pulse.bb: image with pulseaudio added !69
• kernel:dtbo:genio: Add pinfunc file !68
• linux-seco-mtk:genio-common.cfg: drivers for bt and sn65dsi83 added !65
• .gitattributes: handle dts as text with correct line endings !64
• dtbo:genio:display-lvds-*.dts: adapted for bugfixed mtk_dsi.c !62
• bsp:u-boot: Set fv_env.config via libubootenv !61
• dtbo:genio:display-lvds-c3007054491027a.dts: bridges supported by dsi-driver !60
• boot.script: Call bootselect for reading bootmode from GPIO !59
• conf:common: Add MACHINE_RELEASE_ARTIFACTS for CI !56

Project meta-seconorth-machine

• conf:machine: Fix whitespaces in supported hardware and add warning !548
• machine:mx8mp: Rename HDMI-GPU DT to only HDMI !547
• fngboot/mx6boot: update to FnG-Boot v16 release with U-Boot support !546
• machine:mx8: Add DTs for additional device combinations to the build !541
• machine:mx8mp: Add MV + FLD-070FML !538
• seco-mx8mp: Add devicetree for tr8p v1r3 and pconxs, remove for older tr8p revisions !537
• kernel: Re-enable the symlinks for Flash-N-Go System !536

Project meta-seconorth-distro

• libubootenv: Add config for Genio devices !756
• distro: make syslogging message format compatible with Rocko !755
• qt-kiosk-browser: add a systemd unit and adjust default URL !747

Release kirkstone/20.0

released at 2024-03-26 14:49

Project manifest

• docs:readme: Add info for Genio paltform machines !1724
• Update markdown documents !1720
• srcrev: Set correct revision for seco-show-demo package !1711
• gitlab-ci: Add seco-genio510 to machines !1684
• manifest: Remove mtk-specific poky repository !1655

Project uboot-imx-kuk

• mx8:env: set address for custom mem logo !199
• env: move env variables to a separate headers !193

Project u-boot-mtk

• Rename dts !18
• Add genio510 !15

Project egalaxi2c

• driver: Add new mode with threaded interrupt !110

Project linux-mtk

• dts:seco:seco-genio700-wilk.dts: according to schematics GPIO127 is used as SPI1_MOSI !45
• dts:seco:seco-genio-common.dtsi: mmc2 node added for sona mt320 !44
• Add irq header file and move common nodes to a single file !43
• dts:seco: Remove seco-wilk.dts as it was renamed !41
• dts:wilk: Rename to seco-genio700-wilk.dts !40
• Seco stm32 driver !37
• dts: Add device tree for genio510 based module !31

Project linux-imx-kuk

• arm64:dts: Split QX-070 MV DT into MXT and EETI variant !473
• Add FG0700 GTD for SOM-SMARC-MX8M-Plus on MV !472
• logo: add mem logo !465

Project yocto-install

• fng-install: AB-installation: allow installation inside yocto by default !44
• prepare-logo: Add support of mx8 boot.cfg !43
• Add mlabel as GPLv2 alternative for dosfslabel !41
• prepare-logo.sh: clean boot directory and boot script if logo file was not found !39
• fng-install.sh: Fix AB installation for imx6 based devices !37

Project seco-sharedconf

• network-conf: Replace spaces when hostname fallback from devicetree is used !39
• network-settings: cleanup MAC Adress and hostname code !35

Project seco-show-demo

• qml:video: Enable controls and colorize icons !43
• qml:video: Set correct path for video files !40
• Update demo for EW24 !37

Project meta-seconorth-mtk

• kernel:dtbo: Fix some pin assignments for Modular Vision displays !58
• conf/machine/include/mediatek-common.inc: firmware for MT7961 added !53
• linux-seco-mtk:genio-common.cfg: driver for MediaTek MT7921S added !52
• Add irq header file !51
• boot.script: Make bootscript generic !49
• Stm32 kernel module !47
• Add genio510 !40

Project meta-seconorth-machine

• bootscript-uboot/boot.scr.cfg: check if boot logo addr is set !533
• bootscript-uboot/boot.scr.cfg: load custom logo !528
• machine:mx8mp: Build additional DTs for SOM-SMARC-MX8M-Plus !525
• bootscript-uboot:boot.scr.cfg: also check for bootB.cfg file !522
• linux:mx6:defconfig: enable BT_RFCOMM !513

Project meta-seconorth-distro

• seco:demo: Add new parameters to config.ini !745
• fngsystem: Add uuu scripts to release artifacts !744
• bootselect: Fix double print when setting the bootmode !737
• networking: Remove dhcpcd as network manager's internal dhcp client is used !736
• packages:demo: Add webengine and virtualkeyboard dependencies !735
• bootselect: Remove sysfs path error and add message to set operation !732
• conf:distro:include: Introduce MACHINE_RELEASE_ARTIFACTS variable !731
• Flash-N-Go System: Allow to specify root password !723
• emc-test-suite: add bluez, glibc-iconv and expect packages to RDEPENDS !718
• Flash-N-Go System: Add mtools to replace fatlabel !715

Project config

• local.conf: Enable pressure monitoring !224
• setup:script: Changed default path for sstate_cache !223
• setup-environment: Add seco-genio510 machine !218

Release kirkstone/19.0

released at 2024-02-27 13:28

Project touchgpio

• driver: Replace set/get functions with cansleep equivalents !23

Project linux-mtk

• drivers:seco-stm32.c: enable all (currently) possible interrupts !35
• Add IRQs to STM32 !34
• dts:seco-wilk.dts: hdmi-audio moved to seco-wilk.dts !33
• macros module_platform_driver() and module_mipi_dsi_driver() replaced by modul_init() and module_exit() !30
• dts:wilk: Move can controller configuration from overlay !28
• drivers:gpu:drm:mediatek: Fix mtk_dp driver for DP port output !27

Project linux-imx-kuk

• driver:pca953x: Disable input latching for level interrupts !464
• Add touch support on MV with QX-070WSVGA !463
• arm64:dts:seco: Fix line-names of D18 GPIO-Expander !458
• Add initial maxtouch touch support for ModularVision with SOM-SMARC-MX8M-Plus !457
• imx8mp d18/levy: add support for TAS2505 audio-codec on ModularVision !451

Project yocto-install

• fng-install: mount back everything that was mounted before script started !35
• Add initial version of script for enabling and disabling console in FNGS !34
• Add script to change kernel boot logo !31

Project gfxml2dto

• dto: Add custom logo support !132

Project meta-seconorth-mtk

• machine:seco-genio700: Change machine override from seco-genio700 to genio700 !45
• Add various displays for modular vision !44
• dtbo:baseboard-csm-b79.dts: hdmi-audio moved to seco-wilk.dts !43
• kernel:dtbo: Organize overlays !39
• dtbo:baseboard-csm-b79.dts: startreck panel removed !38
• lvds-support and annal-7"-lvds-display added !37
• kernel:dtbo: Move can configuration to module DT file !36
• kernel:dtbo: Add display-dp overlay !35
• Add Modular Vision baseboard support !34
• recipe:u-boot: Dynamically choose DRAM size overlay in boot.script !30

Project meta-seconorth-machine

• wifi: Add NXP wifi driver for pcie8997 to be used for rf-testing !518
• linux:defconfigs: enable CONFIG_NULL_TTY !515
• imx8mp d18/levy: add driver for TAS2502/TLV3204 audio-codecs !512
• kernel:config:mx6: boot time optimization !507

Project meta-seconorth-distro

• ALSA: merge mixer-states for different codecs into single file !724
• sysvinit-inittab: do not spawn getty if console=ttynull is set !719
• imx8mp d18/levy: add support for TAS2505 audio-codec on ModularVision !717

Release kirkstone/18.0

released at 2024-02-02 12:15

Project manifest

• Update Santino CAN test !1598
• Update hints.md !1593
• manifest: Update revisions for MediaTek layers !1581
• manifest:default: Remove SSH remotes !1579

Project uboot-imx-kuk

• cmd:guf: Add ENV mode to bootselect !191
• imx8mp levy: add bootselect via GPIO !190
• Revert "more methods to power down display before boot" !189
• imx8mp: add board-detection for D18/LEVY module on B79 and MV !188
• Disable U-Boot console if CONFIG_DISABLE_CONSOLE is set !175

Project u-boot-mtk

• board:seco:common: Read STM32 firmware version !14
• board:seco: Read SECO_CODE and RAM_CODE !13
• boards:mediatek: Create seco-genio700 board file !12
• Set baud rate 115200 and switch console to UART1 !11
• defconfig: Enable grepenv command and hush parser !10
• mt8188: Add i2c driver !9
• Update sources to upstream release 23.2 state !7

Project linux-mtk

• dts:wilk: Add STM32 gpio line names !26
• drivers:staging:gpio: Add PI4IOE5V6408 driver !25
• Set baud rate 115200 and switch console to UART1 !24
• dts:wilk: Move TPM to correct i2c bus !23
• Update kernel to upstream state !22
• dts:wilk: Configure TPM !20

Project linux-guf

• Fix suspend issues for SANTINO-LT !278
• gpio: Kconfig: make GPIO_SYSFS config always visible !277
• panel-dt: fix number of found panel modes !276
• logo: add mem logo !273
• arm:dts:imx6qdl-san: fix EEPROM size !272
• arm:dts:imx6: adjust backlight brightness !267
• iMX6 devices: Switch powersupply for CAN/RS485 on demand !264

Project linux-imx-kuk

• Fix for D18 rework !448
• Add Modular Vision support for SOM-SMARC-MX8M-Plus !447
• Fix suspend issues for SANTINO-LT !446
• Clean-up of devicetrees !445
• arm64:dts:seco: Revert deletion of seco-imx8mp-d18.dts !444
• Add support for Myon 2 Mini and ConXM !442
• dts:d18: Disable fec/ethphy1 because of address collision !441
• iMX6 devices: Switch powersupply for CAN/RS485 on demand !422
• SANTINO(-LT): Switch display clock to PLL2 to enable spread spectrum !419

Project yocto-install

• Add GPLv2 alternative for fatlabel !33
• scripts:common: add fallback to gf-versions !30

Project seco-yocto-test-suite

• imx6-ram-interface-perf.sh: Copy script from redmine !31

Project gfxml2dto

• platform.c: Do not write to stderr when identifying the machine !134

Project gf-productiontests

• drm_touchtest: fix visual bugs !109
• drm: allow drm test to auto select display !106

Project meta-seconorth-mtk

• Set baud rate 115200 and set default serial interface to UART1 !33
• bsp:u-boot: Remove boot counter from boot script !32
• kernel:dtbo: Add HDMI and headless overlays !31
• kernel:dtbo:b79: Fix ina219 bus in dt overlay !29
• machine:genio700: Add files required for Flash-N-Go System !27
• kernel:dtbo:b79: Fix ic2 devices bus, add INA219 !26
• Add WiC and U-Boot setup for Flash-N-Go System !25

Project meta-seconorth-machine

• bootscript: Adapt load of temp grade overlays to support dtbo and dtb files !511
• machine:mx8mp: Add MV for D18 with 7-, 10- and 15-inch displays !510
• Added devicetree for Myon 2 on ConXM (with HDMI) !509
• uuu-scripts: Add support of Nallino !508
• rtc-pcf8563-guf: blacklist in-tree driver !502
• kernel:config: add config for seco-mx6ull-fsl !493
• u-boot: add variant with disabled serial console !481

Project meta-seconorth-distro

• seconorth:bootselect: Add environment mode for U-Boot !716
• graphics:wlvncc: Add password argument patch !714
• ssh: sshdgenkeys: wait for config partition !713
• u-boot: add variant with disabled serial console !712
• readme: Fix small format errors !711
• images:fng: Add WiC image for Flash-N-Go System !708
• seconorth-image: add packages for memlogo !705

Release kirkstone/17.0

released at 2023-12-15 07:51

Project manifest

• srcrev: Update u-boot recipe !1556
• srcrev: Update mtk recipes !1554

Project u-boot-mtk

• Revert "defconfig: Set seco-wilk as default device tree" !5
• Apply patches from recipes and add seco_genio700 defconfig !4

Project linux-mtk

• dts:seco:seco-wilk.dts: rtc added !17
• dts:seco:wilk: Configure CAN controller !16
• dts:seco:seco-wilk.dts: enable-pin added, regulator moved to baseboard !15
• dts:seco:wilk: Configure SPI interface !14
• dts:seco:wilk: USB configuration !13

Project linux-guf

• SANTINO(-LT): Switch display clock to PLL2 to enable spread spectrum !263

Project linux-imx-kuk

• drivers:cap11xx-gpio: Add new gpiochip driver for the cap1293 tc !436
• tanaro:rtcs: Fix compatible string !435
• arm:dts:imx6qdl-san: fix EEPROM size !434
• arm:dts:imx6: adjust backlight brightness !427
• arm64:dts: Move DISPLAY_ENABLE, TOUCH_INT and TOUCH_ENABLE from *-pinfunc.h !426
• arm:dts:santino: add parallel display support !420

Project qt-multi-screen-compositor

• main.qml: Send inverted mouse move events if the rotation is 180 deg !94

Project gfxml2dto

• santino, santino-lt, nallino: parallel display support for nxp based kernel !122

Project meta-seconorth-mtk

• Sync with Yocto-Mediatek !24
• recipes: Remove u-boot patches !23
• dtbo:baseboard-csm-b79: Added peripherals !22
• core:udev: Configure CAN interface via udev rule !20
• conf:seco-genio700: Remove genio-700-evk from overrides !19
• kernel:dtbo: Add CAN controller overlay !18
• Sync with Yocto-Mediatek project !17

Project meta-seconorth-machine

• conf:mx8mp: Add overlay for cap1293 cap touch sensor !503

Project meta-seconorth-distro

• productiontests:dualscreen-tests: Fix backlight path !704
• packagegroups:tests: Add spidev-test package !698

Release kirkstone/16.0

released at 2023-11-17 08:43

Project manifest

• gitlab-ci: Add seco-genio700 to machines !1503
• Hints.md: Add bluetooth serial port example !1498
• Add support for MediaTek SoCs !1496
• Disable confluence stage for no-gplv3 image !1487
• Confluence: use Kirkstone parent ID for SDK page !1485
• default: Added meta-rauc to manifest !1397

Project uboot-imx-kuk

• U-Boot i.MX8M: Host tool to reduce usage of space for RAM settings !174
• uboot imx8mp: add support for D18 / LEVY module !171

Project u-boot-mtk

• Wilk device tree !3

Project linux-mtk

• dts:seco:wilk: Move hdmi and dsi nodes to baseboard overlay !12
• dts:seco:wilk: Enable back DSI panel 0 !11
• drivers:staging:mfd:seco-stm32.c: different chip id for wilk !10
• dts:seco:seco-wilk.dts: apated to wilk !8
• arm64:dts:seco:wilk: Adjust I2C configuration !7
• Configure UART interfaces !6
• dts:wilk: Update dts to state release 23.1 !5
• dts:wilk: Set lower i2c clock frequency !3
• dts: Adjust RAM size to 4GB !2

Project linux-guf

• arm:dts:imx6: disable ldb in base device tree !258

Project linux-imx-kuk

• imx8mp:clk-pll14xx:video-pll1: Add additional setpoint for 987MHz !429
• arm64:dts: Remove unused and broken DTS for DualEspresso !428
• Improve NALLINO support !423
• driver:ac97: Added dummy AC97 driver !418
• Drivers for MCU, FPGA and FT5x06 from linux-5.10 integrated !417
• drivers:staging:trizeps8-mcu: Add mfd and gpio driver for the trizeps8mcu !415
• arm:dts:nallino, santino-lt: add parallel display support !393

Project seco-show-demo

• assets:logos: Add new SECO logo !29

Project qt-multi-screen-compositor

• Screen.qml: Enable SW Cursor !91

Project gf-productiontests

• drm: add drm versions of pixel and touch test !103

Project gf-emc-test-suite

• setup_network: Fix the script !188
• pbb: Add emission and immunity scripts used for testing !187

Project meta-seconorth-mtk

• recipes-kernel:files: Cleanup non-relevant cfg files !13
• recipes-kernel:dtbo: Cleanup dtbo directory and add csm-b79 overlay !12
• recipes-kernel:files: Add cfg file for seco-genio700 !11
• conf:layer: Increase layer prio to be higher than meta-rity !10
• core:udev: Set correct permissions for dma_heap via udev rule !9
• genio700:wks: Add WKS file for Genio 700 !8
• recipes: Rename to seco-genio700 in more places !7
• gitlab-ci: Add CI/CD !5
• machine:genio700: Added machine specific dependencies from mtk layers !4
• Rename machine from seco-genio-700 to seco-genio700 !2

Project meta-seconorth-machine

• uboot imx8mp: add D18/Levy support !497
• conf:mx8mp: Add devicetree for trizeps8plus pconxs G156HAN02 display !496
• machines: Add generic seco-arm MACHINEOVERRIDE !495
• machines: Add new seco-nxp machine override !494
• machine:recommends: Add NXP specific packages to RRECOMMENDS !490
• config:mx8m: Enable SECO drivers !489
• seco-mx6ull-fsl: Add configs for imx6ull machine !472

Project meta-seconorth-distro

• packages:demo: Use new SECO logo in Trade Show Demo !697
• conf:layer: Increase layer priority to 10 !696
• base:profile: Extend weston profile to detect correct UID !695
• distro:fng: Fix wrong override for virtual runtime !692
• images:fng: Remove i.MX dependencies from fngsystem-image !689
• gf-productiontests: add drm version of tests !688
• Add support for MediaTek SoCs !687
• weston:rotation: fix output name for seco-mx6*-fsl !686
• multimedia: remove gpu packages for mx6ull machine !673

Project config

• setup:genio700: Move DTBO autoload to machines !209
• setup:genio700: Remove extra rootfs space !208
• setup:genio700: Change PACKAGE_CLASSES from ipk to rpm !204
• Add support for MediaTek SoCs !203
• bblayers: Added meta-rauc !173

Release kirkstone/15.0

released at 2023-10-20 13:07

Project manifest

• Hints: Update Tanaro bluetooth and bluealsa test commands !1462
• Integrate meta-seconorth-machine/kirkstone-rauc-preparation !1459
• CI: Add pipeline to build "no-gplv3" yocto image !1429

Project linux-mtk

• Gitlab ci !1

Project linux-guf

• logo: Add new SECO logos and disable old logos !249

Project linux-imx-kuk

• arch:arm64:imx8mp-d18: Add line names for gpio-expander !406
• arm64:dts:seco:imx8mp: Align imx8mp.dtsi to freescale/imx8mp.dtsi !400
• bluetooth:hci_uart: add missing NULL check in h5_enqueue !399
• arm64:dts:imx8mp-d18: Add gpio-line names !396
• logo: Replace SECO logos by new ones !388
• gpu:drm:panel-lvds: Add sel6/8 gpio support !384
• driver:ucb1400: Add retry to read routine !382
• dts:tcg035: Reduce pixel-clk to 7 MHz !380
• dts:d18: Enable ectrl support !377

Project seco-yocto-test-suite

• video-tests: update download routine and add iMX8MM config !4

Project meta-seconorth-mtk

• Lk prebuilt !1

Project meta-seconorth-machine

• kernel:config:mx6: Disable fngsystem logo per default !484
• kernel:config:mx6-fsl: Enable dynamic debugging and tracer !483
• bootscript:fbcon: Change BG to black !482
• bootscript[-alt|-uboot]: place boot.cfg and variants into deploy directory !471
• linux-imx-5.15:config: Add pcf2123 RTC driver !470
• bootscript: add rauc.slot=A to kernel command line !469
• uuu-scripts: import from meta-seconorth-distro !464
• conf:mx8mp: Add D18 base DT !459
• seco-mx6: Flash WIC images via UUU !454

Project meta-seconorth-distro

• distros:bootfiles: Remove the specifc selection of the bootfiles in the distro !672
• fngsystem image: do_deploy: Pack all files copied to the subfolder !671
• [packages][sdk] Added Astarte Qt5 SDK !670
• curl: set tftp default blocksize to maximum !667
• uuu-scripts: move to meta-seconorth-machine !660
• fngsystem: Set distro to nogplv3 !613

Project config

• Enable no-gplv3 layers for "no-gplv3" distros !185

Release kirkstone/14.0

released at 2023-09-22 10:50

Project manifest

• imx6: Fixed touch performance issues !1436
• hints: Add general remarks regarding touch issues !1427
• Revert "Integrate u-boot-mtk/gitlab-ci" !1425
• srcrev: Changed u-boot-imx to u-boot-seco-imx !1381

Project uboot-imx-kuk

• seco-mx6: enable fastboot !166
• boards:trizeps8plus: Better module detection !160
• trizeps8plus: Support for 4GB DRAM !159
• gitlab: Set new recipe name !158

Project u-boot-mtk

• Add gitlab-ci !1

Project linux-guf

• drivers:i2c-imx: Add option for i2c read processing within ISR !242
• Fix SD card timeout errors !231

Project linux-imx-kuk

• drm:panel:panel-lvds: Added support for eDP panels to panel-lvds !375
• dts:d18: Add support for D18 SMARC (aka Levy) module !374
• drivers:i2c-imx: Add option for i2c read processing within ISR !373
• driver:ucb1400: Add retry to read routine !365
• driver:wm9705: Check and re-set dig2 config register !364
• Fix boot hangs with SD card inserted !356

Project yocto-install

• fngsystem: add script to run postinstallation on installed yocto !13
• fnginstall-common: handle gpt partition table !11

Project seco-sharedconf

• config:network: Add check for invalid settings !13
• udev:rules: Fix force_ro and disable it !11

Project meta-seconorth-machine

• kernel:config: enable squashfs support !460
• systemd-conf:wired.network: do not send DHCP release on service stop !458
• Add SUPPORTED_HARDWARE variable for all platforms !456
• kernel:config: Add driver module for Marvel Bluetooth chips !455
• kernel:firmware: Fix install task for seco-mx6-fsl sdk build !444
• bootscript:alt: Check for custom script and run it if found !443

Project meta-seconorth-distro

• graphics:wlvncc: Modify wlvncc for Qt compositor !661
• Refactor passing information about release artifacts to the CI package stage !654
• fngsystem: Register IPv6 DNS servers correctly via DHCP !651
• qt-multi-screen-compositor:mx6: Enable linux-dmabuf-unstable-v1 !648
• packages:iot: Added Edgehog packages and requirements !647
• utils:mxt-app: Improve config parser !644
• openssh: Remount /etc/shared before generating SSH keys !643

Project meta-seconorth-nogplv3

• Move the relevant no-gplv3 config to include file to reuse it !141
• parted: add gplv2 version !138

Project config

• config:setup: Add check to fngsystem NoGPLv3 feature !176
• Enable the no-gplv3 layers for fngsystem distros. !171
• bblayers: add seconorth-nogplv3 and gplv2 layers !168

Release kirkstone/13.0

released at 2023-08-29 07:24

Project manifest

• seco-sharedconf: rename to remove gf- prefix !1360
• manifest: Added post-install scripts from yocto-install !1357
• mv fng-install to machine layer, rename to yocto install !1325
• SRCREV.conf: Add ref for yocto-install repo !1322
• Integrate seco-sharedconf/add-autotools !1319
• Move sharedconf to own repo and recipe to machine layer !1311

Project uboot-imx-kuk

• seco_mx6: apply dt overlay generated from xml !153
• Add xml2dto command to override MAC address !149
• seco-mx6 - edehog adaptations !145

Project ilitek

• Add gitlab-ci configuration for automatic manifest integration !1

Project atmel-mxt

• Add gitlab-ci configuration for automatic manifest integration !1

Project touchgpio

• Add gitlab-ci configuration for automatic manifest integration !1

Project linux-imx-kuk

• arm:dts:imx6dl: Set correct LVDS crtc for SANTARO and SANTOKA !353
• driver:ucb1400: Add polling mode !350
• driver:ucb1400: Added pen-up debounce to UCB1400 !347
• logo: Fixed main logo and replace Flash-N-Go logo !346
• dts:mc3: Disable IRQ for WM9705 !345
• driver:restouch: Added pen-up debounce function !341
• dts:mc3: Add recovery GPIOs to I2C busses !340

Project yocto-install

• Adapt to shared conf renames !8
• Add script and service for seco-hmi postinstallation !7
• Name cleanup !3
• Makefile: Add automake files !2
• CI: Enable CI !1

Project seco-sharedconf

• Rename files to remove the deprecated gf- prefix !7
• sharedconf: Adjust function to read out mac adress from otp fuses for mx8mm and mx8mp !5
• Makefiles: Add autotools files and setup installation in Makefile.am !2
• CI: Add integration CI code !1

Project meta-seconorth-machine

• yocto-install: Workarround for seco-mx6-fsl build !438
• Adapt to renames to remove the gf- prefix !433
• gfxml2dto: Fix default branch name in recipe: dunfell to main !430
• add seco-hmi-postinstallation !429
• machine:mx8mp: Added additional DTs for MC3 !428
• Make Edgehog WIC bootable !427
• fng-install: mv to machine, rename recipe to yocto-install !422
• sharedconf: Adapt recipe to makefile based build of the scripts !421
• Kirkstone edgehog preparations !420
• u-boot: rename u-boot-imx to u-boot-seco-imx !419
• fngboot: Update to latest internal release v15.0r3961 !418
• sharedconf: Move recipe to machine layer. !417
• mx6:boot: Combined bootloader (fngboot + U-Boot) for SECO NE i.MX6 devices !405

Project meta-seconorth-distro

• uuu: fix shellcheck warning !640
• weston-init: Fix libinput calibration for dash !637
• packagegroups:benchmark: Add stressapptest package !634
• Add logrotate configuration !631
• uuu: update scripts for mx6 boards !630
• packages:small: Added tslib-uinput !629
• fng-install: Remove from distro layer !624
• sharedconf: Change to use code from external repo !623
• ffmpeg: remove 'commercial' flag when non-free parts are disabled !622
• fng-install:boot: Add install script for mx6-boot !621

Project meta-seconorth-nogplv3

• packages:small: Remove logrotate !133

Release kirkstone/12.0

released at 2023-07-27 11:21

Project manifest

• Update features.md !1293
• Add recipe to include general yocto test script  !1289

Project uboot-imx-kuk

• board:common: Temp grade detection !144

Project linux-guf

• audio:sai:mqs: Patch mqs and sai driver to fix audio popping on NALLINO !213
• arm:dts:NALLINO: Add CAN support !212

Project linux-imx-kuk

• driver:pi4io: Added IRQ support !331
• dts:arm64:imx8m: Make temperature grade overlays SoC specific !329
• dts:arm64:imx8m: Add overlays for temperature grades !328
• MC3 UCB1400 touch: fix touch pressure for Weston !327

Project seco-yocto-test-suite

• Add simple makefile to copy all scripts !3
• CI: Add CI scripts !2
• Add initial video and qmlbench test scripts !1

Project meta-seconorth-machine

• mx8m:bootscript-uboot: Apply temperature grade overlays !409
• linux-seconorth:mx6ull: Add MQS driver !408
• seco-mx6ull:defconfig: Enable iptables !407

Project meta-seconorth-distro

• test: Fix seco-yocto-testsuite recipe !616
• wlvncc: wayland vnc client !612
• Add recipe to include general yocto test script !611
• audio:mqs: Added init service for the MQS !610
• emc-test-suite: Disable bball using glx for xwayland !608
• libimxdmabuffer: Fix udev script for dma heap symlinks !607

Release kirkstone/11.0

released at 2023-06-29 14:16

Project uboot-imx-kuk

• seco-mx8 (mini|plus): Use board detection in SPL to apply board specific SSC values. !138
• add mx6 pfid detection !135
• uboot:board:seco-mx6: add initial seco-mx6 board !127

Project linux-imx-kuk

• MC3 UCB1400: modify code/filter to reduce jitter !325
• dts:mc3: Added DT for TCG035QVLPAANN !323
• bus:ac97: Added reset to retry-loop of bus scan !321
• Add support for other i.MX6 SAN boards !320
• Add support for SANTVEND !280

Project secure-element-examples

• Add README with instructions for build and usage !5

Project libmdb

• add all device mode by allowing pollbyte to be 0. !84

Project gf-emc-test-suite

• pbb emc test: Update test scripts, fix relay script usage, fix whitespaces !142

Project meta-seconorth-machine

• fngboot: add initial recipe !404
• kernel:config:mx6ull: Enable uinput !403
• Fix framebuffer console on Nallino !402
• conf:mx6-fsl: Deploy all san devicetrees for seco-mx6-fsl machine !401
• Enable u-boot recipes without freescale layer !399
• drivers:rtl8723ds: Set correct license and correct/remove some comments !398
• kernel:config: enable CONFIG_INPUT_UINPUT for imx6 !397

Project meta-seconorth-distro

• fng-install: Allow installation from user partition !606
• ts_calibrate: Fix parameter handling ts_calibrate_extended script !604
• weston rotation: Fix service to dynamically update the weston rotation, enable it by default !603
• graphics:calibration: Added rotation to ts_calibration !602
• core:ro-overlay: Converted service to notify !601
• weston:config: Added service that checks the transform of the config !600
• Add systemd analyze !599
• fng:install: Fix format_user_partition for partition without fs !598
• weston:mx6ull: Reworked Nallino Weston configuration !597
• Extend and fix ro-overlay helper !596
• sharedconf:name: Changed default name and set name with serial !595
• conf:seconorth-wayland: Add x11 to DISTRO_FEATURES !594
• install:prepare:gf-prepare-xml2dto.sh: add handling for new gfxml2dto argument !545

Release kirkstone/10.0

released at 2023-06-02 09:50

Project manifest

• Add firewall section to the hints. !1222
• srcrev: Updated U-Boot revision !1208
• srcrev:kernel: Fixed revision of linux-imx !1192

Project uboot-imx-kuk

• Enable watchdog in defconfig for seco-mx8mm and seco-mx8mp !130
• add version_to_fdt command !129
• configs: enable CONFIG_VERSION_VARIABLE for tanaro and trizeps !128
• add generic platform and baseboard revision detection !126

Project linux-guf

• arm:dts: Moved muxing of EN_VBAT to generic SANTVEND out group !207
• panel-dt: Add handling of "sel6_8_polarity" property in device tree !205
• arm:dts:san: fix i2c1 gpio numbers !204

Project linux-imx-kuk

• touch:filter: Moved touch filter to separate module !317
• backport BSM support for RTC RV3028 !316
• ac97:scan: Adjust bus scan retry function !315
• bus:ac97: Added retry to AC97 bus scan !314
• dts:dual-espresso: add gpio name for LED-BUTTON_RES line !313
• dts:trizeps8plus: Enable sdma2 by default !312
• dts:mc3: Added termination to CAN interfaces !311
• dts:trizeps8plus: Add support for new audio codec wm8962 !310
• dts:mc3: Fixed reset polarity of GPIO-Expander !309

Project secure-element-examples

• Set EX_SSS_BOOT_DO_ERASE to 0 !3

Project gfxml2dto

• dto: Create ldb nodes only if lvds was enabled in xml !104
• dto: panel: Add "sel6_8_polarity" property !103

Project gf-emc-test-suite

• pbb emc test: Update test scripts !139

Project meta-seconorth-machine

• kernel:config: enable CONFIG_INPUT_UINPUT !394
• bootscript:mx8: Remove cma size parameter from kernel cmdline !393
• kernel:config: Activated PPP in the defconfig for the i.MX6 devices !391
• machine:mx8mp: Added MC3 v1r0 DT !390
• install board info environment information into the device tree !386

Project meta-seconorth-distro

• Customizations for Xwayland and X11 features !591
• qtbase: link against libssl at compile-time !590
• sharedconf:network: Added zeroconf fallback to networkd !589
• gitignore: Removed whitespace from gitignore !586
• packages:minimal: Added xconfig to packagegroup !585
• adjust gf-versions script to read from devicetree !584
• packages:networking: Added PPP !583
• security: Enable Platform SCP authentication !582
• packages:libs: Added libmodbus to connectivity !581
• fng:install: Updated comments and some clean-up !580
• packages:tests: Moved Qt tests to packagegroup-seconorth-qt !579
• qtbase: Add package config ICU !556
• qt: Add recipe for gamma_ray qml debug tool. !520

Project config

• setup:config: Replaced MIRRORS by PREMIRRORS !148
• setup: exit setup script correctly regardless of how it was called !147

Release kirkstone/9.0

released at 2023-05-05 19:34

Project linux-imx-kuk

• arm64:dts: Re-enable VPU on tanaro and trizeps8plus !308
• dts:mc3: Added UCB1400 !307
• dts:aarch64:mc3: Enable PD signal of ADV7535 by default !305
• fsl_sai: disable irqs during AC97 register access !303

Project gf-emc-test-suite

• bball: fix multiple definition linking error !137

Project meta-seconorth-machine

• imx-lib: switch to the NXP repo on github.com !388
• conf:mx8m: Set IMX_BOOT_SEEK var for mx8mp and mx8mm machines !387

Project meta-seconorth-distro

• video: Add symlinks for dma_heap nodes if the cma size is specified by cmdline !577
• core:ro-overlay: Added workaround for machine-id !576
• core:ro-overlay: Added detection of bootdevice !575
• packages:uboot: Moved libubootenv-cfg to optional packages !574
• packages:small: Reverted ro changes for the U-Boot tools !573
• wic:plugins: Add a Wic plugin for to customize the boot partition !572
• uboot:tools: Fixed wrong check !571
• sharedconf:network: Enable systemd network service by default !570
• core:helper: Added read-only-rootfs overlay helper !569

Project config

• setup: Replaced return with exit !144
• bblayers_seco-mx6-fsl.conf: Add bblayers file for fsl based mx6 boards !135

Release kirkstone/8.1

released at 2023-04-24 11:34

For Dual-Espresso

Project manifest

• SRCREV: Add secure-element-examples to SRCREV.conf !1156

Project uboot-imx-kuk

• config:tr8plus: Added GPIO read cmd to defconfig !124
• cmd: gpio: Add gpio read subcommand !123
• dts:mc3: Added status and error LEDs !122
• cmd:guf: Fix board detection of MC3 !120

Project linux-imx-kuk

• fix AC97 read timeouts !300
• dual-espresso:arm64:dts: Set SD-card drive strength to DSE_X6 !299
• dts:mc3: Added baseboard DT to Makefile !298
• dts:mc3: Added test baseboard DT !297

Project secure-element-examples

• CI: Add gitlab-ci files to the repository !1

Project gfxml2dto

• dto: add functions to add lvds related overlays for fsl based imx6 dtb !100

Project meta-seconorth-machine

• u-boot:scripts: Clean-up of boot config and scripts !383
• Switch to the NXP repos on github.com !382
• modules:touch: Fixed wrong branch in GPIO driver !381
• boot:scripts: Optionally run custom boot script !380
• rtc-pcf8563-guf: prevent resetting of TIE bit to support bootselect !379

Project meta-seconorth-distro

• uboot:tools: Disabled post-install config check !563
• image:prepare: Moved the network conf to the prepare-image step !562
• security: build plug&trust MW mini package as shared library !561

Project config

• setup:config: Added MIRRORS variable to local.conf !142

Release kirkstone/8.0

released at 2023-04-05 18:48

Project uboot-imx-kuk

• spl:ttl: Set TTLOUT1 on GPIO-Expander !118
• cmd: Activated the boot mode command for TANARO !115

Project linux-guf

• arm:dts:santvend: Remove regulator for EN_VBAT to allow access using gpiod !199

Project linux-imx-kuk

• dts:mc3: Updated the pixel clock of the LCDIF2 !296
• dts:mc3: Fixed OTG mode on DWC3.0 !295
• driver:gpio: Get input status from PI4IO !292
• dts:mc3: Added old v1r0 DTBs !291
• dts:arm64:mx8m: Set cma size of mx8m to 320 MiB !290
• dts:arm64:dual-espresso: Fix pfid gpio assignment !287
• dts:mc3: Added GPIO-Expander and moved TTL-Pins !286
• dts:arm64:dual-espresso: Add gpios for baseboard rev detection !285
• driver:dwmac: Removed failing check for VLAN promisc mode !279

Project seco-show-demo

• demo:slideshow: Reverted changes for custom media path !1

Project meta-seconorth-machine

• kernel:config: Activated the PI4IO GPIO-Expander !376
• seco-mx6-fsl: Add new machine !370

Project meta-seconorth-distro

• sharedconf: Add rw flag in remount startup script !555
• qtbase: Remove gbm packageconfig_distro option for seco-mx6-fsl machine !554
• security: Add recipe for plug and trust middleware mini package !552
• seco:demo: Updated URL to new path !549
• demo:fullscreen: Added fullscreen parameter to config !546

Release kirkstone/7.1

released at 2023-03-17 14:41

Project uboot-imx-kuk

• cmd bootselect: Added platform detection for tr8mp pbb and bootselect gpio !113

Project linux-imx-kuk

• dts:mc3: Added DT that enables all HDMI outputs !278
• dts:arm64:pbb: Merge pbb changes from 5.10.52 kernel branch !268

Project gf-emc-test-suite

• Add testcase for tr8mp pbb !128

Project meta-seconorth-machine

• machine: mx8mp mx8mm: Add pbb devicetree !371

Project meta-seconorth-nogplv3

• packagegroup:small: Remove lmsensors package !109

Release kirkstone/7.0

released at 2023-03-10 09:06

Project manifest

• features: Update test results for SantVend !1098
• features: Add entry for webbrowser and chromium version !1097
• features: Update AD7879 entry for imx6. !1093
• srcrev:sort: Sorted entries in SRCREV !1090
• srcrev:demo: Updated seco-show-demo !1088
• Fix typo for build Yocto for i.MX8MP !1068

Project uboot-imx-kuk

• pbb: Add pbb debug_cable signal to hog !111
• imx8m: Disable video_pll on clkout !109

Project linux-guf

• arm: dts: imx6qdl-santvend: Fix style issues !192
• net: phy: Fix race condition on link status change !189

Project linux-imx-kuk

• dts:arm64: atmel maxtouch on Fannal 10.1: fix reset polarity !271
• dts:dual-espresso: Increase SD-Card drive strength to DSE_X4 !262
• driver:wm9705: Set ABS to full ADC range !261

Project gfxml2dto

• santvend: add an alternative way to get board rev !93

Project meta-seconorth-machine

• driver:touch: Moved MXT, Ilitek and Touchgpio to own repos !367
• seco-mx6:defconfig: Enable Prolific PL2303 USB serial !362
• seco-mx6:defconfig: Enable TMP116 and TC74 sensors !361
• seco-mx6.conf: add pre-shutdown scripts for SANTVEND !358

Project meta-seconorth-distro

• SDK: add missing GLES3 headers !542
• qt:base: Include fontconfig to qtbase !541
• packagegroup-seconorth-small: add lmsensors and watchdog !536
• weston postinstall: Add trizeps VIII Mini and Plus to the avaible machines !535
• tslib:calib: Added min_interval forwarding !534
• weston:post-inst: Added comment regarding removal !533

Release kirkstone/6.0

released at 2023-02-10 14:36

Project manifest

• doc: Update urls in whats_new_since_dunfell !1034

Project uboot-imx-kuk

• trizeps8[mini|plus]: Adapt load adresses for more space for kernel and devicetree !105
• pbb:debug console: Configure iomux for the debug console gpios !100
• seco-mx8m[m|p]: Move VIDEO_PLL1 ssc to own function, enable from spl. !98
• cmd:bootselect: Add support for PBB baseboard with tr8mini !97

Project linux-guf

• arm: dts: santvend: Make the ldb node disabled by default !176
• DTS MDB update for Santvend !175
• arm: dts: santvend: Update lvds nodes !174
• SANTVEND: Add Bluetooth LE support !173
• SANTVEND: LDO bypass feature !172
• arm: dts: san: santvend: Add lm73 sensor !171
• arm:dts:santvend: Enable VEML7700 light sensor !170
• Add support of Quectel EC21/EC25 !169
• hwmon: (tmp116) Add TI TMP116 driver !168
• SANTVEND: Shutdown feature !167

Project linux-imx-kuk

• sound:fsl_sai: Fix sai configuration if SAI_AC97 is not used !257
• dts:arm64: Add devicetree for trizeps8plus_v1r3 pconxs hdmi !254
• driver:wm9705: Fine-tuning of the filters for the WM9705 !243
• dts:mc3: Changed default mode for DWC3 to peripheral !238
• dts:mc3: Fixed wrong display size !236

Project libmdb

• Update slave test !70

Project gfxml2dto

• dto: ldb: Set status for the node to okay !88
• platform: add support of SantVend !87

Project meta-seconorth-machine

• mx8mp: Add trizeps8plus_v1r3 pconxs hdmi devicetree !357
• kernel:config: Removed AC97 config entries !356
• touch:atmel_mxt: Fix duplicated free_irq when probe fails !347
• seco-mx6:defconfig: Enable SPIDEV and SPIDEVAS !346
• firmware:mx8: Add firmware for NXP 88W8997 WiFi/BT Modul !344
• kernel:defconfig:seco-mx6: Enable a driver for VEML7700 sensor !343
• bsp:tools: Added memtool from imx-test !342
• seco-mx6:defconfig: Adjust config for SantVend !340

Project meta-seconorth-distro

• tslib:calibrate: Added wrapper for ts_calibrate !522
• systemd:journal: Disable reading kernel messages from KMsg !521
• nginx: disable service by default !518
• sharedconf: Fix readout of mac from fuses in FNG System !517
• packagegroups:tests: Clean-up of tests group !516

Project meta-seconorth-nogplv3

• packagegroup:tests: Added hdparm to the remove list !92
• packagegroups: Clean-up of packagegroups !91

Release kirkstone/5.0

released at 2023-01-17 11:42

Project manifest

• Update features.md !962

Project uboot-imx-kuk

• dts:trizeps8mini:pconxs: Move pinctrl for PconXs 'fastboot' button to hogging !91
• trizeps8mini: Merge support for V2R2 !88

Project linux-guf

• Fix sound playback for Santvend !166
• ARM: errata: workaround Cortex-A9 errata 761320, 794072, 845369 !163
• arm: dts: Add initial support for SANTVEND !160

Project linux-imx-kuk

• dts:mc3: Add USB-C power fail and name USB GPIOs !218
• driver:max1363: Added workaround for ADC MAX11601 !212
• dts:trizeps8mini V2R2: Add first pconxs3 device tree !202
• dts:tanaro: Fix name in headless devicetrees !201
• touch:wm9705: Fixed infinite mode on WM9705 !197

Project meta-seconorth-machine

• dts:seco-mx6: Add device tree binaries for SantVend boards !339
• touchdriver: Port atmel-mxt driver from rocko !337
• kernel:config: Added MAX1363 driver to defconfig !334
• kernel:config: Applied sort and uniq on all defconfigs !331
• image:wic: Removed broken WIC images !330

Project meta-seconorth-distro

• Revert "ssh: make sshd config more secure" !515
• sharedconf: Add functions to read out mac adress from otp fuses !514
• fng-install: Don't delete Flash-N-Go System partition during yocto installation !513
• fng-install: Allow to use -postfixes in the machine name, know matched correctly !512
• Add qt-mouse-test, qt-dpi-test and qt-playsound tests !511
• Add nginx support to the image !506
• ssh: make sshd config more secure !505
• install:prepare: Look for overlays with dtbo and dtb ending !504
• image:wic: Removed WIC image layout file !503
• sharedconf: Update network config on the fly with sconfig !494
• weston:shell: Removed fixed shell from service !493
• conf:networkd: Added DHCP options to allow resolve of address in local domain !492

Project meta-seconorth-nogplv3

• Add emc-test-suite package to image for testing purposes !86

Project config

• bblayers: add meta-webserver !114
• setup: Find multiple SRCREV in the manifest !105

Release kirkstone/4.0

released at 2022-12-08 16:33

Project manifest

• features.md: Update of the seco-mx6 device features !958
• Add hints file as starting point for collecting tests and commands !945
• Integrate linux-seconorth and seconorth-machine: Change dts folder to seconorth !940

Project uboot-imx-kuk

• spl:mc3: Set TTLOUT1 in SPL !86

Project linux-guf

• dts:santaro:santoka: Set wp-gpio for SD-Cards !151
• seconorth:dts: Rename devicetree subfolder to seconorth !150

Project linux-imx-kuk

• dts:tanaro: Add devicetree for headless devices with and without GB ethernet !199
• dts:tanaro: Add overlay to disable ethernet mac (fec1) !198
• dts:dual-espresso: Set bus frequencies of i2c1 and i2c6 to 400kHz !196
• dts:dual-espresso: Remove 100MHz pinctrl for SD Card !193
• drivers:power: Add a custom poweroff module for dual-espresso !192
• mc3: csi camera support with ov5640 !191

Project qt-multi-screen-compositor

• Rework Compositor !48

Project gf-emc-test-suite

• Add video_play example qml !99

Project meta-seconorth-machine

• seco-mx8mm:Tanaro: Add headless devicetrees !320
• seco-mx8mm:Tanaro: Add overlay for not populated ethernet phy !319
• seco-mx6:defconfig: Enable iptables !318
• seco-mx8mp:defconfig:Enable camera drivers mipi-csi !317
• dts:seco-mx6: Rename devicetree subfolder to seconorth !315
• kernel:mx8m:defconfig: Add gpio-custom-power-off driver !312

Project meta-seconorth-distro

• tanaro: Add overlay to disable GB ethernet mac when phy is not populated !490
• sharedconf: Add function to enable partition write access !489
• Add tzdata, set default timezone to Berlin !488
• qmlbench: Set nobranch in SRC_URI !486

Release kirkstone/3.0

released at 2022-11-10 12:05

Project uboot-imx-kuk

• tanaro: Disable display support in defconfig !82

Project linux-guf

• logo: Added SECO and EDGEHOG logo !145

Project linux-imx-kuk

• dts:mc3: Add pcie to dts, mostly copy from evk. !187
• dts:tanaro:Fannal 10.1" display: improve timing, works with SSC now !185
• dts:lq057: Updated the pxlclk also for the panel_lvds block !184
• mc3: Add onboard and backplane HDMI support !183
• dts:tanaro:Fannal 10.1" display: Fix maxtouch reset polarity !182
• sai:ac97: Replaced timeout message with debug message !181
• Added temperature sensor and EEPROM chip for MC3 !180
• dts:mc3: Added ADC chip to I2C !179
• dts:dual-espresso: Configure touch reset pins as open-drain !178
• Added support for the WM9705 touchscreen controller !177
• seco-mx8mm:tanaro: Add support for FANNAL 10.1" and fix pixel clock for DataImage 10.1" display. !176
• dts:lq057: Changed to lower clock-frequency !175
• dts:mc3: Updated status LEDs to correct values !174
• fsl_sai: Fix CONFIG_SND_SOC_FSL_SAI_AC97, build failed without this !173
• files: Fixed access permissions of driver files !172
• dts:trizeps8plus: Disable VPU !171
• bus:ac97: Added AC97 mode to SAI !166

Project meta-seconorth-machine

• mx8mp: Add mc3 hdmi backplane devicetree !309
• tanaro: Add devicetree for Fannal 10.1" display !307

Project meta-seconorth-distro

• fng-install: Fix missing output in error cases !481
• weston-init: Change path of weston.ini so it is used for mx6 based devices also !479
• rng-tools: Omit libjitterentropy !473
• qtbase: Add QStylesheetStyle alignment patch !472

Release kirkstone/2.0

released at 2022-10-14 09:56

Project manifest

• packages:revision: Added linux-seconorth revision to SRCREV !869
• Update README: Fixed Url to container registry !861

Project uboot-imx-kuk

• MC3: Fix missing LPDDR4 RAM setting !79
• trizeps8plus/mc3: Add fuse decoding for RAM size !78
• cmd:guf: Disabled debug output !76

Project linux-guf

• CI: Updated gitlab-ci and switched to new recipe name !136

Project linux-imx-kuk

• dts:mc3: Added status and panic LEDs !165
• dts:dual-espresso: Add missing SD-Card pinctrl !164
• dts:mc3: Enabled GPUs and VPUs !161
• mc3:dts: Enable ECSPI1 !160
• dts:mc3: Set correct backlight PWM period for lq057q3dc12 !159
• extcon: ptn5150: Add queue work sync before driver release !156

Project meta-seconorth-machine

• kernel:mx8m: Added additional modules for AC97 and WM97XX !301
• bootscript: Set build directory to working directory !298
• u-boot:mkimage: Removed include file for custom mkimage !297

Project meta-seconorth-distro

• weston: Fixed auto-start of systemd service !471
• seco-pnmtologo: Add seco-pnmtologo recipe !469
• netpbm: Add PACKAGES for lib and logotools !468
• netpbm: Refactor recipe !467
• tests: Add phytool to packagegroup-tests !466
• x11: Use standalone xwayland package !465
• seconorth-wayland: Refactor DISTRO_FEATURES:remove !462
• systemd:getty: Removed default getty instance on tty1 !461
• fng-install: Fixed target parameter !460
• psplash: Update patches !459
• fngsystem: fix missing files in deploy step (kernel), fixed uuu shell scripts !458

Release kirkstone/1.0

released at 2022-09-16 12:09

Project manifest

• features: Update Tanaro RS485 support !856
• Update README, features and whats_new files. !852
• Integrate gitlab-ci/repo-do-not-exclude-tags !811
• poky: Upgrade poky to kirkstone-4.0.3 plus few additional commits. !809
• meta-freescale: Upgrade to current ref in kirkstone branch !805
• Fix seco-show-demo revision !793

Project uboot-imx-kuk

• cmd:guf: Added boot bus detection to guf sub-system !74
• spl: Print selected config ( devicetree name) during startup !72
• maincontroller3: Add support for mc3 with the same image for trizeps8plus !71
• Added LPDDR4 3733MT/s Rate and use it as default for Trizeps VIII Plus and 2GB RAM !64

Project gfplatdetect

• Rename default branch to main !47

Project linux-guf

• arm: dts: nallino: Prevent disablement of VDD_3P3 regulator !127

Project linux-imx-kuk

• dts:panel: Fixed data mapping for lq057q3dc12 !155
• dts:mc3: Enable device mode on usb-c port !152
• dts:mx8mp: Added HDMI devicetree include for i.MX8MP !151
• arm64:dts: Spun out the lq057q3dc12 from the MC3 DT !149
• dts:mc3: Add support for USB type A !145
• arm64: dts: tanaro: Reduce pixelcklock frequency for scx1001255ggu06 !144
• Add support for mc3: Devicetree changes. !143
• arm64: dts: tanaro: Add device tree for scx1001255ggu06 !139
• dts:mc3: Added voltage regulator nodes !130
• mc3:dts: Initial commit for mc3 devicetree !129

Project xconfig

• Rename default branch to main !46

Project gfxml2dto

• Rename default branch to main !68

Project gf-productiontests

• Rename default branch to main !49

Project meta-seconorth-machine

• kernel:dtb: Create devicetree links named like the original dtb names in deploy folder !294
• kernel:mx8m:defconfig: Add ptn5150 driver !291
• u-boot:mc3: Add support for multiple devicetrees for u-boot and imx-boot !290
• machine:mx8mm: Fixed device tree order !289
• kernel:mx8mp: Added AC97 to the defconfig !288
• machine:mx8mp: Added MC3 lq057q3dc12 DT !287
• tanaro: Add SCX1001255GGU06 support !282
• imx8m: switch to fsl mkimage, remove usage of precompiled firmware from mkimage repo !279
• machine:mx8mp: Added MC3 devicetree !271
• u-boot-imx: Add copy of 2021.04 version to keep it after layer upgrade. !270
• kernel:config: Enabled additional dmabuf drivers/frameworks !268

Project meta-seconorth-distro

• udev: use ignorelist.d instead of blacklist.d, because it was renamed upstream !455
• fng-install: Improve error detection when resolving 'gitlab' links !452
• systemd: Change package config removal to variable to modify it in other layer !451
• Fix gf-versions and related scripts. !450
• image:fng: Added gpiod tools !449
• fng-system:ramfs: Increased the size of the ramfs !448
• productiontests: Add scripts to run tests on dual-espresso board !446
• fngsystem: Add beep to packagegroup-productiontests !445
• fng-install: Handle gitlab 'links' during file download. !441
• fng-install:rtc: Fixed return in RTC post-install !428
• x11: Removed obsolete patch from meta-freescale !427
• packagegroup:multimedia: Added comment to imxvpuapi !426
• packagegroup:multimedia: Added VPU test libraries !425

Project meta-seconorth-nogplv3

• systemd-networkd: Enable networkd by override the removal variable !63

Release kirkstone/0.3

released at 2022-08-19 09:12

Project manifest

• srcrev: Updated linux-imx to current 5.15.32 revision !783
• Rename machines to seco-mx.. names. !747
• srcrev: Added qt-multi-screen-compositor to SRCREV !744
• Pull changes from dunfell branch !714
• Update gitlab ci to latest revision !712
• manifest: Add meta-gplv2 !708
• Update gitlab-ci !690

Project uboot-imx-kuk

• defconfig: Added missing raw initramfs and realtek driver !63

Project linux-imx-kuk

• gitlab-ci: Update master branch to 5.15.32 !128
• dts:trizeps8plus: Disable audio codec on new revision !127
• dts:arm64:tanaro: Add devicetree files from 5.10 kernel !126

Project qt-multi-screen-compositor

• Config:systemd: Invoke systemd notify when the compositor is ready !32
• Add server and client to compositor allowing window control !18

Project gf-emc-test-suite

• Update branch and recipe name for kirkstone integration !75

Project meta-seconorth-machine

• kernel: Update kernel for i.MX8M to 5.15.32 !267
• kernel:logo: Fixed defconfig to re-enable logo selection !266
• kernel:driver: Added audio codec WM8962 driver to i.MX8 !264
• kernel:logo: Fixed boot logo selection !263
• kernel:defconfig: Disabled audit !262
• conf:imx8mp: Add new dual-espresso devicetree to build artifacts !261
• machine: Renamed include for mx8 to seco-mx8 !259
• Rename machines to seco-mx.. names. !258
• bootscripts:kernel: Fixed machine names for i.MX8 !257
• imx6guf/imx6ullguf: Revert additional machine overrides as SOC_FAMILY is included anyway !256
• imx8mguf: Resort the devicetree list as the first entry is used as default !255
• maxtouch:imx6: Integrate touch driver as module !253
• kernel:dma: Disabled ION in favor of dma-heap !252
• machine:mx8m:dt: Fixed the devicetrees for mx8mm/mx8mp !251
• Pull changes from dunfell branch !249
• Update gitlab-ci !243
• Integrate gitlab-ci/move-python-scripts-to-subfolder !228

Project meta-seconorth-distro

• imx:vpu: Re-added imx-vpuwrap !424
• fng-install: Fixed error that clears the dt in the config !423
• fng-install: Updated post-install scripts !422
• packagegroups: Add net-tools and vim to the packagegroups !421
• seco-show-demo: Port to the latest seco-show-demo !419
• fng-install: Fixed custom devicetree for i.MX8 !417
• fnginstall: Fixed wrong machine name !416
• uuu: Fixed artefact names !415
• demo: Remove guf-show-demo2 !414
• Weston: use kiosk shell !413
• Rename machines to seco-mx.. names. !412
• Remove overlay folder in boot, cleanup prepare-image scripts !411
• qt:compositor: Fixed qt-compositor to run under Yocto Kirkstone !410
• Kirkstone prepare-rtc fix !409
• weston: Remove weston@service and rely on the poky provided variant !408
• fngsystem:devicetree: Handle dtbo files correctly !407
• overrides: Fix _ vs : syntax, use mx6, mx6ull and mx8 for machines !406
• Adapt layer to work with the meta-seconorth-nogplv3 layer !403
• fng-install:self-update: Added missing -r option to copy !402
• post-install: Fixed overrides in prepare-image !400
• Pull changes from dunfell branch !396
• Update gitlab-ci !387
• Integrate gitlab-ci/move-python-scripts-to-subfolder !369

Project meta-seconorth-nogplv3

• class:image: Fixed wrong pg name in small image class !53
• demo: Renamed demo to seco-show-demo !52
• image: Renamed image classes and images to seconorth !51
• Cherry-pick from dunfell and rewrite nogplv3 distro. !49
• Update gitlab-ci !44
• Integrate gitlab-ci/move-python-scripts-to-subfolder !33

Project config

• Rename machines to seco-mx.. names. !81
• LICENSE: Add Apache 2.0 license file !79
• Update gitlab-ci !76
• Integrate gitlab-ci/move-python-scripts-to-subfolder !65

Release kirkstone/0.2

released at 2022-06-02 10:42

Initial kirkstone pre-release for Tanaro.

Project manifest

• manifest: Removed DualEspresso manifest !633
• Integrate gitlab-ci/remove-dual-espresso-image-build and 5 more !626
• Allow check job to fail !621
• CI: update MASTER_BRANCH variables to kirkstone !610
• manifest: Changed remote for seco-ne to HTTPS !604
• Rename layers to seconorth !603
• README: Move README.md description to manifest !581
• Add linux-imx entry to SRCREV.conf !568
• Adapt SRCREV.conf to kirkstone override syntax !567

Project uboot-imx-kuk

• env: Updated env for edgehog !29

Project egalaxi2c

• LICENSE: Add GPLv2.0 license file !23

Project qt-multi-screen-compositor

• Rotation: Fix 90 and 270 degree screen rotation !10
• Rotation: Read rotation at startup !7
• LICENSE: Add BSD 3-Clause license file !3
• Mouse: Disable client cursor !2
• multi-screen:dual-espresso: Hard coded rotation by 180 deg !1

Project libmdb

• LICENSE: Add Apache 2.0 license file !24

Project gfeeprom

• LICENSE: Add Apache 2.0 license file !16

Project meta-seconorth-machine

• Integrate gitlab-ci/skip-check-via-label and 1 more !221
• git: Changed protocol to HTTPS !214
• Update gitlab-ci !213
• README: Refactor Readme and add License info !208
• u-boot-imx: Remove patches that are not used anymore !206
• [kirkstone] kernel: Add receipes for tanaro 5.15 kernel. !202
• readme: Update and clean-up !199
• kernel: Set default Kernel for i.MX6 to 5.15.29 !198
• Kirkstone imx6 !189
• overrides: Run automated conversion of OVERRIDES !187

Project meta-seconorth-distro

• Integrate gitlab-ci/skip-check-via-label and 1 more !359
• Update gitlab-ci !352
• git: Changed protocol for tools to HTTPS !350
• README: Refactor Readme and add License info !343
• network: Fix distrooverride for network: set mac address, removed networkd !341
• emc-tests: Clean-up of emc-test-suite recipe !334
• [kirkstone] fng-install:u-boot: Fix installation on devices without u-boot environment !330
• [kirkstone] guf-show-demo: Adapt to new wayland dir, run as user weston, use kioskshell !329
• [kirkstone] weston: Adapt the transform keywords to weston 9 !328
• fngsystem: Fixed do_collect_files in fngsystem-image !327
• [kirkstone] Tools:drm/framebuffer: Add drm-framebuffer to access the drm device from cmdline !325
• nxp: Fixed additional NXP BSP overrides !324
• kirkstone: Add pam to DISTRO_FEATURES !314
• Convert overrides !307

Project meta-seconorth-nogplv3

• Integrate gitlab-ci/skip-check-via-label and 1 more !27
• Update gitlab-ci !20
• image: Fixed licenses exclusion and sorted packages !14
• layer: Changed layer compatibility to Kirkstone !13
• readme: Added section with build instructions !11

Project config

• bblayers: Search for customer configs in manifest !60
• Integrate gitlab-ci/allow-check-job-to-fail and 1 more !59
• Update gitlab-ci !53
• setup: Increase niceness to make the build server more responsive !44

Release kirkstone/0.1

released at 2022-05-02 13:16

Project uboot-imx-kuk

• CI: Remove unused azure and travix yml files !17
• Environment: set size to 0x2000 for trizeps8plus !15
• CI: Replaced gitlab-ci for reproducible builds !13
• Update tanaro uboot !12
• Update tanaro lpddr4 settings !10
• bootselect: Added disable flag for bootmode_gpio !9
• bootselect: Added DualEspresso to G&F sub-system !8
• bootscript: Add G&F bootscript to trizeps8plus config !7
• Merge changes from v2019.04 to v2020.04 branch !6

Project egalaxi2c

• Add special file creation !7
• Add gitlab-ci for reproducible builds (WIP) !4

Project libmdb

• CI: Add gitlab-ci for reproducible builds !6
• libmdb: Fix dependency between lib and test !4
• libmdb: Fix gpiod access to mdb-wakeup-out. !3
• libmdb: Move lib to subfolder, add mdbtests to test subfolder. !2
• libmdb: Rewrite mdb_wakeup implementation to gpiod interface. !1