Release kirkstone/17.0
released at 2023-12-15 07:51
- srcrev: Update u-boot recipe !1556
- srcrev: Update mtk recipes !1554
- productiontests:dualscreen-tests: Fix backlight path !704
- packagegroups:tests: Add spidev-test package !698
- conf:mx8mp: Add overlay for cap1293 cap touch sensor !503
Release kirkstone/16.0
released at 2023-11-17 08:43
- gitlab-ci: Add seco-genio700 to machines !1503
- Hints.md: Add bluetooth serial port example !1498
- Add support for MediaTek SoCs !1496
- Disable confluence stage for no-gplv3 image !1487
- Confluence: use Kirkstone parent ID for SDK page !1485
- default: Added meta-rauc to manifest !1397
- packages:demo: Use new SECO logo in Trade Show Demo !697
- conf:layer: Increase layer priority to 10 !696
- base:profile: Extend weston profile to detect correct UID !695
- distro:fng: Fix wrong override for virtual runtime !692
- images:fng: Remove i.MX dependencies from fngsystem-image !689
- gf-productiontests: add drm version of tests !688
- Add support for MediaTek SoCs !687
- weston:rotation: fix output name for seco-mx6*-fsl !686
- multimedia: remove gpu packages for mx6ull machine !673
- uboot imx8mp: add D18/Levy support !497
- conf:mx8mp: Add devicetree for trizeps8plus pconxs G156HAN02 display !496
- machines: Add generic seco-arm MACHINEOVERRIDE !495
- machines: Add new seco-nxp machine override !494
- machine:recommends: Add NXP specific packages to RRECOMMENDS !490
- config:mx8m: Enable SECO drivers !489
- seco-mx6ull-fsl: Add configs for imx6ull machine !472
Release kirkstone/15.0
released at 2023-10-20 13:07
- Hints: Update Tanaro bluetooth and bluealsa test commands !1462
- Integrate meta-seconorth-machine/kirkstone-rauc-preparation !1459
- CI: Add pipeline to build "no-gplv3" yocto image !1429
- distros:bootfiles: Remove the specifc selection of the bootfiles in the distro !672
- fngsystem image: do_deploy: Pack all files copied to the subfolder !671
- [packages][sdk] Added Astarte Qt5 SDK !670
- curl: set tftp default blocksize to maximum !667
- uuu-scripts: move to meta-seconorth-machine !660
- fngsystem: Set distro to nogplv3 !613
- kernel:config:mx6: Disable fngsystem logo per default !484
- kernel:config:mx6-fsl: Enable dynamic debugging and tracer !483
- bootscript:fbcon: Change BG to black !482
- bootscript[-alt|-uboot]: place boot.cfg and variants into deploy directory !471
- linux-imx-5.15:config: Add pcf2123 RTC driver !470
- bootscript: add rauc.slot=A to kernel command line !469
- uuu-scripts: import from meta-seconorth-distro !464
- conf:mx8mp: Add D18 base DT !459
- seco-mx6: Flash WIC images via UUU !454
Release kirkstone/14.0
released at 2023-09-22 10:50
- imx6: Fixed touch performance issues !1436
- hints: Add general remarks regarding touch issues !1427
- Revert "Integrate u-boot-mtk/gitlab-ci" !1425
- srcrev: Changed u-boot-imx to u-boot-seco-imx !1381
- graphics:wlvncc: Modify wlvncc for Qt compositor !661
- Refactor passing information about release artifacts to the CI package stage !654
- fngsystem: Register IPv6 DNS servers correctly via DHCP !651
- qt-multi-screen-compositor:mx6: Enable linux-dmabuf-unstable-v1 !648
- packages:iot: Added Edgehog packages and requirements !647
- utils:mxt-app: Improve config parser !644
- openssh: Remount /etc/shared before generating SSH keys !643
- kernel:config: enable squashfs support !460
- systemd-conf:wired.network: do not send DHCP release on service stop !458
- Add SUPPORTED_HARDWARE variable for all platforms !456
- kernel:config: Add driver module for Marvel Bluetooth chips !455
- kernel:firmware: Fix install task for seco-mx6-fsl sdk build !444
- bootscript:alt: Check for custom script and run it if found !443
Release kirkstone/13.0
released at 2023-08-29 07:24
- seco-sharedconf: rename to remove gf- prefix !1360
- manifest: Added post-install scripts from yocto-install !1357
- mv fng-install to machine layer, rename to yocto install !1325
- SRCREV.conf: Add ref for yocto-install repo !1322
- Integrate seco-sharedconf/add-autotools !1319
- Move sharedconf to own repo and recipe to machine layer !1311
- uuu: fix shellcheck warning !640
- weston-init: Fix libinput calibration for dash !637
- packagegroups:benchmark: Add stressapptest package !634
- Add logrotate configuration !631
- uuu: update scripts for mx6 boards !630
- packages:small: Added tslib-uinput !629
- fng-install: Remove from distro layer !624
- sharedconf: Change to use code from external repo !623
- ffmpeg: remove 'commercial' flag when non-free parts are disabled !622
- fng-install:boot: Add install script for mx6-boot !621
- yocto-install: Workarround for seco-mx6-fsl build !438
- Adapt to renames to remove the gf- prefix !433
- gfxml2dto: Fix default branch name in recipe: dunfell to main !430
- add seco-hmi-postinstallation !429
- machine:mx8mp: Added additional DTs for MC3 !428
- Make Edgehog WIC bootable !427
- fng-install: mv to machine, rename recipe to yocto-install !422
- sharedconf: Adapt recipe to makefile based build of the scripts !421
- Kirkstone edgehog preparations !420
- u-boot: rename u-boot-imx to u-boot-seco-imx !419
- fngboot: Update to latest internal release v15.0r3961 !418
- sharedconf: Move recipe to machine layer. !417
- mx6:boot: Combined bootloader (fngboot + U-Boot) for SECO NE i.MX6 devices !405
Release kirkstone/12.0
released at 2023-07-27 11:21
- Update features.md !1293
- Add recipe to include general yocto test script  !1289
- test: Fix seco-yocto-testsuite recipe !616
- wlvncc: wayland vnc client !612
- Add recipe to include general yocto test script !611
- audio:mqs: Added init service for the MQS !610
- emc-test-suite: Disable bball using glx for xwayland !608
- libimxdmabuffer: Fix udev script for dma heap symlinks !607
- mx8m:bootscript-uboot: Apply temperature grade overlays !409
- linux-seconorth:mx6ull: Add MQS driver !408
- seco-mx6ull:defconfig: Enable iptables !407
Release kirkstone/11.0
released at 2023-06-29 14:16
- fng-install: Allow installation from user partition !606
- tscalibrate: Fix parameter handling tscalibrate_extended script !604
- weston rotation: Fix service to dynamically update the weston rotation, enable it by default !603
- graphics:calibration: Added rotation to ts_calibration !602
- core:ro-overlay: Converted service to notify !601
- weston:config: Added service that checks the transform of the config !600
- Add systemd analyze !599
- fng:install: Fix formatuserpartition for partition without fs !598
- weston:mx6ull: Reworked Nallino Weston configuration !597
- Extend and fix ro-overlay helper !596
- sharedconf:name: Changed default name and set name with serial !595
- conf:seconorth-wayland: Add x11 to DISTRO_FEATURES !594
- install:prepare:gf-prepare-xml2dto.sh: add handling for new gfxml2dto argument !545
- fngboot: add initial recipe !404
- kernel:config:mx6ull: Enable uinput !403
- Fix framebuffer console on Nallino !402
- conf:mx6-fsl: Deploy all san devicetrees for seco-mx6-fsl machine !401
- Enable u-boot recipes without freescale layer !399
- drivers:rtl8723ds: Set correct license and correct/remove some comments !398
- kernel:config: enable CONFIGINPUTUINPUT for imx6 !397
Release kirkstone/10.0
released at 2023-06-02 09:50
- Add firewall section to the hints. !1222
- srcrev: Updated U-Boot revision !1208
- srcrev:kernel: Fixed revision of linux-imx !1192
- Customizations for Xwayland and X11 features !591
- qtbase: link against libssl at compile-time !590
- sharedconf:network: Added zeroconf fallback to networkd !589
- gitignore: Removed whitespace from gitignore !586
- packages:minimal: Added xconfig to packagegroup !585
- adjust gf-versions script to read from devicetree !584
- packages:networking: Added PPP !583
- security: Enable Platform SCP authentication !582
- packages:libs: Added libmodbus to connectivity !581
- fng:install: Updated comments and some clean-up !580
- packages:tests: Moved Qt tests to packagegroup-seconorth-qt !579
- qtbase: Add package config ICU !556
- qt: Add recipe for gamma_ray qml debug tool. !520
- kernel:config: enable CONFIGINPUTUINPUT !394
- bootscript:mx8: Remove cma size parameter from kernel cmdline !393
- kernel:config: Activated PPP in the defconfig for the i.MX6 devices !391
- machine:mx8mp: Added MC3 v1r0 DT !390
- install board info environment information into the device tree !386
Release kirkstone/9.0
released at 2023-05-05 19:34
- video: Add symlinks for dma_heap nodes if the cma size is specified by cmdline !577
- core:ro-overlay: Added workaround for machine-id !576
- core:ro-overlay: Added detection of bootdevice !575
- packages:uboot: Moved libubootenv-cfg to optional packages !574
- packages:small: Reverted ro changes for the U-Boot tools !573
- wic:plugins: Add a Wic plugin for to customize the boot partition !572
- uboot:tools: Fixed wrong check !571
- sharedconf:network: Enable systemd network service by default !570
- core:helper: Added read-only-rootfs overlay helper !569
- imx-lib: switch to the NXP repo on github.com !388
- conf:mx8m: Set IMXBOOTSEEK var for mx8mp and mx8mm machines !387
Release kirkstone/8.1
released at 2023-04-24 11:34
For Dual-Espresso
- SRCREV: Add secure-element-examples to SRCREV.conf !1156
- uboot:tools: Disabled post-install config check !563
- image:prepare: Moved the network conf to the prepare-image step !562
- security: build plug&trust MW mini package as shared library !561
- u-boot:scripts: Clean-up of boot config and scripts !383
- Switch to the NXP repos on github.com !382
- modules:touch: Fixed wrong branch in GPIO driver !381
- boot:scripts: Optionally run custom boot script !380
- rtc-pcf8563-guf: prevent resetting of TIE bit to support bootselect !379
Release kirkstone/8.0
released at 2023-04-05 18:48
- sharedconf: Add rw flag in remount startup script !555
- qtbase: Remove gbm packageconfig_distro option for seco-mx6-fsl machine !554
- security: Add recipe for plug and trust middleware mini package !552
- seco:demo: Updated URL to new path !549
- demo:fullscreen: Added fullscreen parameter to config !546
- kernel:config: Activated the PI4IO GPIO-Expander !376
- seco-mx6-fsl: Add new machine !370
Release kirkstone/7.1
released at 2023-03-17 14:41
- machine: mx8mp mx8mm: Add pbb devicetree !371
Release kirkstone/7.0
released at 2023-03-10 09:06
- features: Update test results for SantVend !1098
- features: Add entry for webbrowser and chromium version !1097
- features: Update AD7879 entry for imx6. !1093
- srcrev:sort: Sorted entries in SRCREV !1090
- srcrev:demo: Updated seco-show-demo !1088
- Fix typo for build Yocto for i.MX8MP !1068
- SDK: add missing GLES3 headers !542
- qt:base: Include fontconfig to qtbase !541
- packagegroup-seconorth-small: add lmsensors and watchdog !536
- weston postinstall: Add trizeps VIII Mini and Plus to the avaible machines !535
- tslib:calib: Added min_interval forwarding !534
- weston:post-inst: Added comment regarding removal !533
- driver:touch: Moved MXT, Ilitek and Touchgpio to own repos !367
- seco-mx6:defconfig: Enable Prolific PL2303 USB serial !362
- seco-mx6:defconfig: Enable TMP116 and TC74 sensors !361
- seco-mx6.conf: add pre-shutdown scripts for SANTVEND !358
Release kirkstone/6.0
released at 2023-02-10 14:36
- doc: Update urls in whatsnewsince_dunfell !1034
- tslib:calibrate: Added wrapper for ts_calibrate !522
- systemd:journal: Disable reading kernel messages from KMsg !521
- nginx: disable service by default !518
- sharedconf: Fix readout of mac from fuses in FNG System !517
- packagegroups:tests: Clean-up of tests group !516
- mx8mp: Add trizeps8plus_v1r3 pconxs hdmi devicetree !357
- kernel:config: Removed AC97 config entries !356
- touch:atmelmxt: Fix duplicated freeirq when probe fails !347
- seco-mx6:defconfig: Enable SPIDEV and SPIDEVAS !346
- firmware:mx8: Add firmware for NXP 88W8997 WiFi/BT Modul !344
- kernel:defconfig:seco-mx6: Enable a driver for VEML7700 sensor !343
- bsp:tools: Added memtool from imx-test !342
- seco-mx6:defconfig: Adjust config for SantVend !340
Release kirkstone/5.0
released at 2023-01-17 11:42
- Revert "ssh: make sshd config more secure" !515
- sharedconf: Add functions to read out mac adress from otp fuses !514
- fng-install: Don't delete Flash-N-Go System partition during yocto installation !513
- fng-install: Allow to use -postfixes in the machine name, know matched correctly !512
- Add qt-mouse-test, qt-dpi-test and qt-playsound tests !511
- Add nginx support to the image !506
- ssh: make sshd config more secure !505
- install:prepare: Look for overlays with dtbo and dtb ending !504
- image:wic: Removed WIC image layout file !503
- sharedconf: Update network config on the fly with sconfig !494
- weston:shell: Removed fixed shell from service !493
- conf:networkd: Added DHCP options to allow resolve of address in local domain !492
- dts:seco-mx6: Add device tree binaries for SantVend boards !339
- touchdriver: Port atmel-mxt driver from rocko !337
- kernel:config: Added MAX1363 driver to defconfig !334
- kernel:config: Applied sort and uniq on all defconfigs !331
- image:wic: Removed broken WIC images !330
Release kirkstone/4.0
released at 2022-12-08 16:33
- features.md: Update of the seco-mx6 device features !958
- Add hints file as starting point for collecting tests and commands !945
- Integrate linux-seconorth and seconorth-machine: Change dts folder to seconorth !940
- tanaro: Add overlay to disable GB ethernet mac when phy is not populated !490
- sharedconf: Add function to enable partition write access !489
- Add tzdata, set default timezone to Berlin !488
- qmlbench: Set nobranch in SRC_URI !486
- seco-mx8mm:Tanaro: Add headless devicetrees !320
- seco-mx8mm:Tanaro: Add overlay for not populated ethernet phy !319
- seco-mx6:defconfig: Enable iptables !318
- seco-mx8mp:defconfig:Enable camera drivers mipi-csi !317
- dts:seco-mx6: Rename devicetree subfolder to seconorth !315
- kernel:mx8m:defconfig: Add gpio-custom-power-off driver !312
Release kirkstone/3.0
released at 2022-11-10 12:05
- fng-install: Fix missing output in error cases !481
- weston-init: Change path of weston.ini so it is used for mx6 based devices also !479
- rng-tools: Omit libjitterentropy !473
- qtbase: Add QStylesheetStyle alignment patch !472
- mx8mp: Add mc3 hdmi backplane devicetree !309
- tanaro: Add devicetree for Fannal 10.1" display !307
Release kirkstone/2.0
released at 2022-10-14 09:56
- packages:revision: Added linux-seconorth revision to SRCREV !869
- Update README: Fixed Url to container registry !861
- weston: Fixed auto-start of systemd service !471
- seco-pnmtologo: Add seco-pnmtologo recipe !469
- netpbm: Add PACKAGES for lib and logotools !468
- netpbm: Refactor recipe !467
- tests: Add phytool to packagegroup-tests !466
- x11: Use standalone xwayland package !465
- seconorth-wayland: Refactor DISTRO_FEATURES:remove !462
- systemd:getty: Removed default getty instance on tty1 !461
- fng-install: Fixed target parameter !460
- psplash: Update patches !459
- fngsystem: fix missing files in deploy step (kernel), fixed uuu shell scripts !458
- kernel:mx8m: Added additional modules for AC97 and WM97XX !301
- bootscript: Set build directory to working directory !298
- u-boot:mkimage: Removed include file for custom mkimage !297
Release kirkstone/1.0
released at 2022-09-16 12:09
- features: Update Tanaro RS485 support !856
- Update README, features and whats_new files. !852
- Integrate gitlab-ci/repo-do-not-exclude-tags !811
- poky: Upgrade poky to kirkstone-4.0.3 plus few additional commits. !809
- meta-freescale: Upgrade to current ref in kirkstone branch !805
- Fix seco-show-demo revision !793
- udev: use ignorelist.d instead of blacklist.d, because it was renamed upstream !455
- fng-install: Improve error detection when resolving 'gitlab' links !452
- systemd: Change package config removal to variable to modify it in other layer !451
- Fix gf-versions and related scripts. !450
- image:fng: Added gpiod tools !449
- fng-system:ramfs: Increased the size of the ramfs !448
- productiontests: Add scripts to run tests on dual-espresso board !446
- fngsystem: Add beep to packagegroup-productiontests !445
- fng-install: Handle gitlab 'links' during file download. !441
- fng-install:rtc: Fixed return in RTC post-install !428
- x11: Removed obsolete patch from meta-freescale !427
- packagegroup:multimedia: Added comment to imxvpuapi !426
- packagegroup:multimedia: Added VPU test libraries !425
- kernel:dtb: Create devicetree links named like the original dtb names in deploy folder !294
- kernel:mx8m:defconfig: Add ptn5150 driver !291
- u-boot:mc3: Add support for multiple devicetrees for u-boot and imx-boot !290
- machine:mx8mm: Fixed device tree order !289
- kernel:mx8mp: Added AC97 to the defconfig !288
- machine:mx8mp: Added MC3 lq057q3dc12 DT !287
- tanaro: Add SCX1001255GGU06 support !282
- imx8m: switch to fsl mkimage, remove usage of precompiled firmware from mkimage repo !279
- machine:mx8mp: Added MC3 devicetree !271
- u-boot-imx: Add copy of 2021.04 version to keep it after layer upgrade. !270
- kernel:config: Enabled additional dmabuf drivers/frameworks !268
Release kirkstone/0.3
released at 2022-08-19 09:12
- srcrev: Updated linux-imx to current 5.15.32 revision !783
- Rename machines to seco-mx.. names. !747
- srcrev: Added qt-multi-screen-compositor to SRCREV !744
- Pull changes from dunfell branch !714
- Update gitlab ci to latest revision !712
- manifest: Add meta-gplv2 !708
- Update gitlab-ci !690
- imx:vpu: Re-added imx-vpuwrap !424
- fng-install: Fixed error that clears the dt in the config !423
- fng-install: Updated post-install scripts !422
- packagegroups: Add net-tools and vim to the packagegroups !421
- seco-show-demo: Port to the latest seco-show-demo !419
- fng-install: Fixed custom devicetree for i.MX8 !417
- fnginstall: Fixed wrong machine name !416
- uuu: Fixed artefact names !415
- demo: Remove guf-show-demo2 !414
- Weston: use kiosk shell !413
- Rename machines to seco-mx.. names. !412
- Remove overlay folder in boot, cleanup prepare-image scripts !411
- qt:compositor: Fixed qt-compositor to run under Yocto Kirkstone !410
- Kirkstone prepare-rtc fix !409
- weston: Remove weston@service and rely on the poky provided variant !408
- fngsystem:devicetree: Handle dtbo files correctly !407
- overrides: Fix _ vs : syntax, use mx6, mx6ull and mx8 for machines !406
- Adapt layer to work with the meta-seconorth-nogplv3 layer !403
- fng-install:self-update: Added missing -r option to copy !402
- post-install: Fixed overrides in prepare-image !400
- Pull changes from dunfell branch !396
- Update gitlab-ci !387
- Integrate gitlab-ci/move-python-scripts-to-subfolder !369
- kernel: Update kernel for i.MX8M to 5.15.32 !267
- kernel:logo: Fixed defconfig to re-enable logo selection !266
- kernel:driver: Added audio codec WM8962 driver to i.MX8 !264
- kernel:logo: Fixed boot logo selection !263
- kernel:defconfig: Disabled audit !262
- conf:imx8mp: Add new dual-espresso devicetree to build artifacts !261
- machine: Renamed include for mx8 to seco-mx8 !259
- Rename machines to seco-mx.. names. !258
- bootscripts:kernel: Fixed machine names for i.MX8 !257
- imx6guf/imx6ullguf: Revert additional machine overrides as SOC_FAMILY is included anyway !256
- imx8mguf: Resort the devicetree list as the first entry is used as default !255
- maxtouch:imx6: Integrate touch driver as module !253
- kernel:dma: Disabled ION in favor of dma-heap !252
- machine:mx8m:dt: Fixed the devicetrees for mx8mm/mx8mp !251
- Pull changes from dunfell branch !249
- Update gitlab-ci !243
- Integrate gitlab-ci/move-python-scripts-to-subfolder !228
Release kirkstone/0.2
released at 2022-06-02 10:42
Initial kirkstone pre-release for Tanaro.
- manifest: Removed DualEspresso manifest !633
- Integrate gitlab-ci/remove-dual-espresso-image-build and 5 more !626
- Allow check job to fail !621
- CI: update MASTER_BRANCH variables to kirkstone !610
- manifest: Changed remote for seco-ne to HTTPS !604
- Rename layers to seconorth !603
- README: Move README.md description to manifest !581
- Add linux-imx entry to SRCREV.conf !568
- Adapt SRCREV.conf to kirkstone override syntax !567
- Integrate gitlab-ci/skip-check-via-label and 1 more !359
- Update gitlab-ci !352
- git: Changed protocol for tools to HTTPS !350
- README: Refactor Readme and add License info !343
- network: Fix distrooverride for network: set mac address, removed networkd !341
- emc-tests: Clean-up of emc-test-suite recipe !334
- [kirkstone] fng-install:u-boot: Fix installation on devices without u-boot environment !330
- [kirkstone] guf-show-demo: Adapt to new wayland dir, run as user weston, use kioskshell !329
- [kirkstone] weston: Adapt the transform keywords to weston 9 !328
- fngsystem: Fixed docollectfiles in fngsystem-image !327
- [kirkstone] Tools:drm/framebuffer: Add drm-framebuffer to access the drm device from cmdline !325
- nxp: Fixed additional NXP BSP overrides !324
- kirkstone: Add pam to DISTRO_FEATURES !314
- Convert overrides !307
- Integrate gitlab-ci/skip-check-via-label and 1 more !221
- git: Changed protocol to HTTPS !214
- Update gitlab-ci !213
- README: Refactor Readme and add License info !208
- u-boot-imx: Remove patches that are not used anymore !206
- [kirkstone] kernel: Add receipes for tanaro 5.15 kernel. !202
- readme: Update and clean-up !199
- kernel: Set default Kernel for i.MX6 to 5.15.29 !198
- Kirkstone imx6 !189
- overrides: Run automated conversion of OVERRIDES !187
